Power Trowel: Concrete Polishing Options for Open Floors

Thursday, August 30, 2018

Concrete Polishing Options for Open Floors

Few would argue that polished concrete looks great and provides some attractive performance benefits as compared to other industrial flooring solutions. It might be easy to decide that you want to have a polished concrete floor put in place in your building, but you might have a harder time deciding how the work will be done. Once the concrete is poured, how will it be polished? Let’s examine some options.

Dry or Wet?

One of the biggest decisions to make in the concrete polishing process is whether the work is going to be done wet or dry. This is exactly as it sounds: sometimes the grinding of the concrete is done wet, while on other occasions it is performed dry. The right choice depends on a variety of factors, so this is a choice made on a case-by-case basis. However, there is a lot to like about using the wet method, specifically because of the lack of dust it creates. Dry polishing produces a significant amount of dust, which will need to be cleaned up before the job is done.

Thinking About Grit

The grit used in the polishing process is going to determine the level of shine achieved. It isn’t necessarily the case that more shine is better as some applications aren’t right for the highly-polished look that is possible with high grit. Before getting started on the job, determine how much shine is desired and then plan grit accordingly.

An Evaluation

It is important to confirm that the concrete floor in question is in the right condition before polishing can begin. This should not be a problem with brand new floors. As long as the floor has had long enough to cure – usually around a month – you should be able to polish in any way that is deemed appropriate. When an older concrete floor is the target for polishing, it will be necessary to evaluate the condition of the floor and perform any repairs needed.

Use a Power Trowel?

Putting a power trowel to use when polishing a concrete floor is a great time saver, especially for a large floor. For smaller jobs, it might not be necessary to use this type of industrial floor polisher, and it might not even be possible if the space is too small for the power trowel to be brought in. However, if there is plenty of room to work with and a large number of square feet to be polished, a power trowel is an excellent choice. The speed of a power trowel simply cannot be taken for granted when taking on a large concrete floor polishing job. This is a tool that can work quickly in a large space, producing a beautifully polished floor in a fraction of the time required by more traditional methods. When you are ready to get started with an industrial flooring project, contact Painters USA for assistance. We have a great deal of experience with this task, and you are sure to be pleased with the results. For jobs near Dallas/Ft. Worth, Houston, Chicago, or Danville, Painters USA is the right pick. Let’s get started today!